Brett Allison -

The Infinidat InfiniBox series are high performing storage systems and deliver excellent performance. However, every controller has limitations, so it’s good to understand the key metrics that describe the health of the system. This blog covers the key metrics driving Infinidat InfiniBox system performance and health.

Key Workload Factors for Infinidat InfiniBox

At the surface level, Infinidat InfiniBox’s key metrics are similar to most storage systems, but understanding how Infinidat’s nuances separate it from other storage systems in your multi-vendor open-system helps when configuring your environment optimally for Infinidat systems.

The key workload factors driving Infinidat InfiniBox performance are the I/O Rates, Read to Write Ratio, Fast Writes, and Transfer Sizes.

I/O’s Per Second

The I/Os per second is the number of Input / Output requests that the system can service. The ability of the system to service I/Os is dependent on a number of workload factors such as: read to write ratio, size of I/O, sequential vs random nature of the workload and the locality of reference of the data which contributes to the cache read hit ratio.

Read to Write Ratio

The read to write ratio is important because reads require less work for the storage system as they are often satisfied in one of the cache layers. For reads, the Infinidat InfiniBox® examines the metadata to determine if the data resides in global DRAM, SSD cache or on SATA drives. Each layer is progressively slower.

Infinidat has a massive global DRAM and uses intelligent algorithms to satisfy the vast majority of read requests from DRAM or SSD cache. The DRAM cache hits and SSD cache hits are important metrics in understanding how the workload is performing.


Writes are written to a single large pool of RAM based cache that is shared across the three node Active-Active-Active architecture. As the written blocks “cool down” Infinidat InfiniBox® cherry picks them for destage from the RAM cache in order to write them efficiently to disk.

One of the things that Infinidat InfiniBox® achieves with their numerous write optimization techniques is that they are able to achieve a high percentage of write hits, that is, updating writes in cache and cutting down on the number of destages to disk from cache.

Transfer Size

Data blocks are stored on persistent media in sections of 64KB for user data and are written using stripes of 14 data blocks and 2 parity sections (14+2). A total InfinRAID stripe is 68KB X 16 or 1088 KB stripe across 16 independent drives. Leveraging various write optimization techniques, the Infinidat InfiniBox® attempts to destage data sequentially, even if it arrived randomly, significantly improving throughput for write operations.

Even so, there are limitations on every storage system, and it is important to monitor your effective read/write ratios and overall write throughput.

Workloads with a locality of reference that can be contained within the capacity of the fastest layer will provide the best performance while workloads with a locality of reference much larger than the DRAM, or SSD cache will reside on the SATA drives and will take longer to fulfill.

Infinidat InfiniBox Latency / Response Time

Latency, or response time, is the amount of time it takes for the system to service an I/O request. As described previously, there are several layers within the system, and they all provide low latency as compared with SATA drives.

The following table provides the latency and compares it to the relative effective distance from the processor at the speed of light. The further from the processor, the longer the I/O request takes.

Technology Latency Effective Distance from the Processor at the Speed of Light
DRAM 1 ns 12 inches
NVMe SSD 7-150 us 1.32 to 28.4 miles
SATA Drives 10 ms 1894 miles

Information derived in connection with:


How to Optimize Infinidat InfiniBox Performance with End-to-End Visibility

Even with a comprehensive understanding of Infinidat’s key performance metrics, effectively monitoring and managing your InfiniBox® storage arrays alongside the rest of your multi-vendor environment requires deeper visibility across your whole system from your VMware through your fabric to your Infinidat InfiniBox.

This includes interpretation of all the key performance metrics:

  • Throughput (factor of I/O rate and Transfer size)
  • Front-end Read Response Time
  • Front-end Write Response Time
  • Front-end Overall Response Time
  • Read Hit %
  • Port Read Response Time
  • Port Write Response Time


End-to-End View of Infinidat InfiniBox Performance in IntelliMagic Vision

End-to-End View of Infinidat InfiniBox Performance in IntelliMagic Vision


IntelliMagic Vision is a multi-vendor SAN infrastructure performance and health monitoring solution that utilizes built-in deep expert knowledge about each of the supported platforms, such as Infinidat InfiniBox, and artificial-intelligence derived insights to provide a single pane of glass for optimizing and protecting the performance and availability of your entire distributed-system environment.

The image above shows one of the out-of-the-box interactive reports presenting all of your Infinidat InfiniBox® key metrics in a single view. By clicking on any of the individual charts in the multi-chart, you drill down to a specific port or volume for quick and seamless root cause analysis.

End-to-End FlashArray Connectivity and Configuration Analysis

IntelliMagic Vision also provides end-to-end visibility for performance and configuration analysis from your hosts through your fabric to your Infinidat InfiniBox® so that you can quickly identify if there are any connectivity configuration issues such as the single path from the host to the storage array as depicted in the image below.

End-to-End Configuration View of Infinidat System in IntelliMagic Vision

End-to-End Configuration View of Infinidat System in IntelliMagic Vision


Efficient Capacity Planning for Infinidat Systems

The Infinidat InfiniBox® has a number of technologies deployed to reduce the footprint and efficiently use the capacity on the system. IntelliMagic Vision provides insight into how efficiently capacity is being used.

In the following table, IntelliMagic Vision provides the utilized capacity along with the data reduction ratio which is key in understanding how efficiently the system is reducing your data.

Capacity Planning infinidat infinibox

In addition to showing the key capacity metrics, IntelliMagic Vision helps in planning for future storage requirements through its capacity forecasting views. In the chart below the ‘Time until running out’ is shown in red. When it is above 360 days it is not displayed on the chart.

infinidat capacity burn down


Better Infinidat Configuration and Monitoring

Infinidat InfiniBox, just with any platform, has key nuances related to its key metrics that are crucial to understand to ensure optimal performance and availability. It is worth taking the time to understand how the nuances of Infinidat storage arrays impact your environment as a whole.

IntelliMagic Vision offers complete end-to-end performance, configuration and capacity monitoring and visibility for the Infinidat InfiniBox® as well as all of the top storage systems on the market. We apply artificial intelligence to the hardware-provided optimal configuration requirements with your specific workload needs to help you proactively eliminate availability and risks and ensure your environment is optimally configured.

If you are looking for in-depth support of your Infinidat InfiniBox® or need a better way to manage your multi-vendor storage environment, start a free trial of IntelliMagic Vision today.

This article's author

Brett Allison
VP of Operations
More from Brett

Share this blog

Configuring INFINIDAT InfiniBox Fibre Channel for Optimal Performance

Subscribe to our Blogs

Subscribe to our newsletter and receive monthly updates about the latest industry news and high quality content, like webinars, blogs, white papers, and more.

Related Resources


Challenging the Skills Gap – The Next Generation Mainframers | IntelliMagic zAcademy

Hear from these young mainframe professionals on why they chose this career path and why they reject the notion that mainframes are obsolete.

Watch Webinar
Cheryl Watson's Tuning Letter

Making Sense of the Many I/O Count Fields in SMF | Cheryl Watson's Tuning Letter

In this reprint from Cheryl Watson’s Tuning Letter, Todd Havekost addresses a question about the different fields in SMF records having different values.

Read more

Insights into Subsystem and Hardware Configurations through Topology Views | IntelliMagic zAcademy

Explore mainframe complexities and visualize hardware/software connections with Todd and John in our webinar. Gain insights into ensuring application resilience.

Watch Webinar

Go to Resources

Request a Free Trial or Schedule a Demo Today

Discuss your technical or sales-related questions with our availability experts today